IEC ISO CE Standard Industry Combined Test Chamber with Temperature Humidity Vibration For Auto Products
Application
Vibration chambers combined with temperature are available for temperature & vibration testing or temperature,
humidity and vibration. Our this combined test system perform tailored environmental stress screening & reliability
tests to reduce product development time, reveal hidden manufacturing defects and improve product reliability.
Model: THV-1000-F, consists of vibration system and temperature system
ESS Test System (HL-1000-F)
3-1 About The Whole Chamber
3-1-1 Dimension
(1) Interior : W1000× H1000× D1000mm
(2) Exterior : W2500 × H2750× D3200mm
Material
(1)Interior is SUS#304 stainless steel
(2) Exterior is SUS#304 stainless steel or paint coated
(3) Thermal insulation materials: High density fire-resistant PU foam insulation material
Mechanical Structure
(1)Single door with a viewing window on the front chamber
(2)Electric cabinet, refrigerator and air conditioner are in back of electric cabinet
(3)The dehumidifier is in the back of the chamber
Wind Supply Cycling System
Motor AC380V 2HP; lengthened axis; sirocco fan; forced circulation
Control System
(1)Programmable LCD touch screen controller, viewing angle 256x128 ,with back light
(2)Temperature ramp control : 0.1 ~ 9.9, settable
(3)Upper and lower limitation standby and alarm function
(4)Temperature sensor is provided
(5)6 groups P.I.D control parameter setting & P.I.D auto graphical function
(6)Both set point and actual value of temperature can be directly displayed
(7)Operating time adding up function
(8) Backup function in case of power off
(9)RS-232 communication
(10)Real time graphical curve display function while programmable running
(11)Can book in advance to start and shut down
(12)Date and time can be adjusted
(13)Screen lock function
Power
AC380V 3 phase ,5 Lines ; 50/60Hz
Vibration System( ES-20)
2-1 Technical parameters
(1) Rated Force: sine force 20000N; random force 20000N; shock force 20000N;
(2) Frequency Range: 3Hz to 3000Hz, Fixed frequency, sweep back and forth, sine, random, shock, shoc synthesis
and mixed mode vibration.
(3)Sweep-frequency Mode: linear, logarithmic, sweep back and forth, fixed frequency
(4)Sweep-frequency Times: 1 to 32767
(5)Sweep-frequency Time: fixed frequency/single 1-3600mins, sweep-frequency curves can be displayed.
(6)Max. Acceleration1000m/s2
(100g ,non load)
(7)Max. Speed: 51m/s
(8)Max. Displacement:51mmp-p (non load), peak-peak
(9)Shock Displacement: 51mm
(10)Weight of Moving Coil: 30kg
(11)Vibration Directions: vertical vibrating (Z Axis)
(12)Vibration Wave: sine, random, shock, the control spectra, wave, signal dynamic range can be displayed
(13)Diameter of the Moving Coil: Φ320 mm
(14)Shaker table's dimension:W750*H650*D550mm
(15)Vibration System weight: 480kg
LCD display:
Logic module adopts microcomputer CPU chip processor, LCD display function;Can be showed various system data
in detail (The power amplify output True RMS value, with additional data display) and operation state and fault
judgment.With remote control, remote measuring, remote communication function, friendly interface, easy operation.
2-4-2-3 Complete protection function:
The power amplifier set up protection of power grid overvoltage, power grid undervoltage, power grid lack of phase,
logic fault, power module, power temperature module,output overcurrent, output overvoltage,driving power, the
table's displacement, table temperature, etc. Any failure occurs, shut down output,with sound and lighting alarm at the
same time. Except the above protection, also has poor RMS value the protection, and emergency stop protection.
2-4-3 Parameters:
Dimension:W550*H840*D1750 mm
Short introduction about ASLi factory:
We are a long history testing equipment manufacturer, in the past 25 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine.
HAST Un-Saturated Steam Chamber is our star products, and we had obtained the CE certification for this machine.
1. Are your company a trading one or a factory?
Factory ,28 years focusing on test instruments field,4 years exporting experience.
2. After an order is placed, when to deliver?
Generally about 20 workdays, If we have finished products, we can arrange shipment within 3 workdays.
Please be aware that our production lead times depend on specific items and item quantities.
3. What about the warranty with after - sales services?
12 months warranty.
After the warranty, the professional after-sale service team will provide perfect technical support,and help customer solve problems encountered while using our product, handles guest problems and complaints in a professional and timely.
4. What about the services and product' quality?
Service: OEM service,Design service,Buyer lable service.
Quality: Each instruments must be carried out 100% quality examination and test, the finished products must through a third party calibration institutions before shipping and delivery goods.
5. How to install and training?
If the products is easy to install and training, customers can learn the operation and maintenance manual to installation and use.
If the products is hard to use, customers can come ASLi factory to learn how to installation and use. And our engineers have a passport, we can go to overseas.
6.What's your main products?
Environmental chambers, temperature (humidity) chamber, PCT /Hast chamber (Highly accelerated stress test chamber),ESS chamber, Walk in stability chamber,Vacuum oven,Altitude chamber,vibration test system, mechanical shock tester,environmental combined vibration chamber,etc.
Welcome our new and regular customers visit our factory, and any inquiries please feel free to contact us !
Audited Supplier 
){kind=link}
){kind=link}