UV Accelerated Weathering Test Chamber for Plastic Aging Testing
Application:
UV Resistant Aging Test Chamber is applicable for the sunlight resistant test of nonmetallic materials and aging test of artificial light sources. A variety of industrial products can make the reliability test, and this product can simulate the product in the sun, rain, humidity and dew conditions, including damage caused by bleaching, color, brightness down, powder, crack, blur, brittle, intensity decreased and oxidation.
| UV Accelerated Test Chamber Technical Parameters |
| Model |
UV-290 |
Internal Dimension
W*H*D (cm) |
115*50*50 |
External Dimension
W*H*D (cm) |
140*160*75 |
| Applicable Standard |
GB/T16422,GB/T5170.9 |
| Temperature Range |
R.T.+15 degree C~+70degree C |
| Temperature Fluctuation |
±0.5degree C |
| Humidity Range |
≥95%R.H. |
Environmental Temperature
for Use |
+5degree C~+35degree C |
| Test Light Source |
UVA,UVB UV light |
Wave Length of Test light
Source (nm) |
280~400 |
Center Distance between
Sample and Tube (mm) |
50±2 |
Center Distance Between
Tubes (mm) |
75±2 |
| Material of Internal Case |
Stainless steel with sanding polish |
| Material of External Case |
Stainless steel with sanding polish or painting coated |
| Heating and Humidifier |
Electric-heat type steam generator ,heating and humidification |
| Safety System |
Operation Interface |
Digital smarts touch key input (Programmable) |
| |
Running Mode |
Program/constant running type |
| |
Input |
Black panel thermometer.PT-100 Sensor |
| Standard Configuration |
1 pc Stainless steel shelves |
| Safety Configuration |
Protection of electric leakage, power outage when over-load, over-temperature
protection, water short storage, ground lead protection |
| Power |
AC220V 1phase 3 lines, 50HZ |
Characteristics:
1.The ultraviolet aging tester is designed according to uses' operation , it's easy to operate, safe and reliable.
2.The thickness of specimen installation is adjustable and the specimen installation is fast and convenient.
3.The door rotating up does not interfere with the operation and the tester takes a very small space only.
4.It's unique condensating system can be contented by tap water.
5.The heater is under the container rather than in the water, which is long life, easy to mainten.
6.The water level controller is outside the box, easy to monitor.
7.The machine has truckles, convenient to move.
8.Computer programming is convenient, automaticly alarming when incorrect operated or faulted.
9.It has irradiance calibrator to extend the life of the lamp tube(more than 1200h).
10.It has Chinese and English instruction book, convenient to consult.
11.Divided into three types: common, light irradiance controlling, spraying
Applicable standards:
(1) ISO 48-3-2006, Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps;
(2) ASTM D4329-2005, Standard Practice for Fluorescent UV Exposure of Plastics;
(3) ASTM D4587-2005, Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings;
(4) ASTM D5208-2001, Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics, etc.
For the package:
1. PP film first
2. Vacuum package
3. PP film again
4. 10mm thickness PU foam to avoid collision
5. stronged plywood case
6. Standard ASLI CASE MARK
ASLi main products: Environmental chambers, temperature (humidity) chamber, PCT /Hast chamber (Highly accelerated stress test chamber),ESS chamber, UV Accelerated Weathering Test Chamber for Plastic Test,Walk in stability chamber,Vacuum oven,Altitude chamber,vibration test system, mechanical shock tester,environmental combined vibration chamber,etc
Audited Supplier 
){kind=link}
){kind=link}