| Certification: | CE, TUV, ISO, BV |
|---|---|
| Warranty: | 1 Year |
| Internal Dimension Wxhxd (mm): | 1000X1000X1000 |
| External Dimension Wxhxd (mm): | 1600X1900X1400 |
| Rotating Speed of Rotating-Plate: | 4~20 Rpm Adjustable |
| Application: | Electronics, Automobile and Communication |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Model | RT-1000A | |
| Specimens | Flammable, explosive, easy volatile material sample test; Storage of corrosive substance sample test,biological test and strong electromagnetic emission source sample test are prohibited. | |
| Volume | 1000 L | |
| Inner Dimension | W1000×H1000×D1000 mm | |
| External Dimension | W1600×H1950×D1450 mm | |
| Weight | 400kg | |
| Air Switch | 63A | |
| Power Supply | AC220V 50/60HZ Single Phase Three Lines 6 m2 Copper Wire | |
| Performance Specification | ||
| Using Environmental: | Temperature:5~30 Deg C, Humidity<85%R.H. (Without load) | |
| Water Temperature | 1. Water temperature can not controlled (environmental temperature) 2. (RT+15 Deg C) ~ 70 Deg C (Optional) |
|
| IPX1 | ||
| Method name: vertical drop water test Sample placement: according to the normal working position of the sample, it is placed on the rotating sample table with 1r/min. The distance between the top of the sample and the drip outlet is not more than 200mm Test conditions: the droplet amount is 1.0+0.5mm/min.Test duration: 10min |
||
| IPX2 | ||
| The method name: tilt 15 degree drop test Sample placement: make sample with a vertical into 15 degree Angle, sample top to drop water mouth distance not greater than 200 mm, each try after a plane, in another side, a total of four times. Test conditions: the droplet amount is 3.0+0.5mm/min.Test duration: 4 * 2.5min, 10min |
||
| IPX3 | ||
| Swinging radius: 400mm Water flow: 1.12 ~ 2.50L/min Average flow speed per hole: 0.07 L/min, 16 holes in total, pore diameter: 0.4mm. Test time: 10 min, the test sample rotated 90 degree after 5 min |
||
| IPX4 | ||
| The semidiameter of swing pipe : 400mm Water flow: 1.61 ~ 2.50L/min Average flow speed per hole: 0.07 L/min, 23 holes in total, pore diameter: 0.4mm. |
||
| IPX5 | ||
| Water flow: 12.5L/min The diameter of hole: Dia. 6.3 mm. Test time: no less than 3min. |
||
| IPX6 | ||
| Water flow: 100L/min The diameter of hole: Dia. 12.5 mm. Test time: no less than 3min. |
||
| Standards comply with | JIS-D0203 and IEC-60529 GB/T 2423.38 2006 / IEC 60068-2.18:2000 in the second part of the spray experiment method GB4208-2008 / IEC60529-2001 shell protection grade |
|
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}