Drop Testing Machine for Battery Packaging Face Edge Angle Drop Test
Application:
Drop Testing Machine for Packaging Face Edge Angle Drop Test is applied to assess the package in the actual transportation, loading and unloading process by dropping the degree of impact, impact-resistant strength and evaluate the reasonable of packaging design.
Drop Testing Equipment Technical Parameters:
| Model |
AS-DT-120 |
AS-DT-150 |
AS-DT-200 |
| Max. Weight of Test Samples (Kg) |
≥200 |
60 |
60 |
| Height of Drop (mm) |
0~1200 |
300~1500 |
300~2000 |
| Max. Dimension of Test Sample WxHxD (mm) |
1200x1200x1200 |
1000x800x1000 |
1000x800x1000 |
| Falling Floor Size WxHxD (mm) |
1400x50x2000 |
1700x50x1200 |
1700x50x1200 |
| Drop Method |
Face, edge, angle |
| Test Bench External Dimension WxHxD (mm) |
1400x2000x1800 |
1700x2700x1200 |
1700x2700x1200 |
| Weight (Kg) |
1500 |
600 |
700 |
| Power |
AC 380V |
Drop Test System Feature:
1. The main axle of tester used dual axle rode, high precision and good stability. Power failure safety design, it will be kept the original condition under power cut and the swing arm will not break away unusually.
2. The tester has set limits upward and down, will not exceed safety range when testing.
3. Support arm with electronic reset capability, can avoid the accident by manual operation.
4. Multi-functional sample supporter: Can rapidly fix the different size package to test the package edges, sides and corners.
5. Micro adjusting control, can rapidly set to the needed testing height.
Package: PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.
Warranty: one year free warranty for whole set machine,lifelong time maintainance.
After-sale service: feedback within 8 hours after get the call or email.
Service:OEM service,Design service,Buyer lable service.
If you want to learn more Drop Testing Machine for Battery Packaging Face Edge Angle Drop Test, welcome to contact us at any time.
Audited Supplier 
){kind=link}
){kind=link}