CE Certified Thermal Cycle Shock Chamber / Temperature Shock Equipment

• Customization: Available
• Certification: CE, TUV, ISO
• Warranty: 1 Year
• Model NO.: TS Series
• Temperature Range: -70~+150 Degree C
• Humidity Range(Optional): 20%~98%R.H.
• Temperature Recovery Time: Less Than 5mins
• Conversion Time: Less Than 5 Seconds
• Temperature Control Accuracy: +/-0.5 Degree C
• Distribution Accuracy: +/-2degree C
• Compressor: French "Tecumseh" Brand
• Transport Package: Wooden Case
• Specification: TS Series
• Trademark: ASLi
• Origin: Guangdong, China
• HS Code: 85141090
• Production Capacity: 300 Sets/Month

Product Description

CE Certified Thermal Cycle Shock Chamber / Temperature Shock Equipment
 

Application:
CE Certified Thermal Shock Test Chamber is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short period, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, electronics amongst other materials. The test result can be used as a reference or basis for product improvement.

 

Temperature Shock Equipment Technical Parameters
Model	TS-42(A~C)		TS-80(A~C)		TS-150(A~C)		TS-252(A~C)
Internal Dimension   W*H*D ( mm)	400*350*350		500*400*400		600*500*500		700*600*600
External Dimension   W*H*D (mm)	1400*1800*1400		1550*1950*1550		1600*2000*1700		1700*2100*1750
Temperature Range  of Testing zone	Type A:-40 degree C ~+150degree C (200degree C is Optional)		Type B:-55degree C ~ +150degree C   (200degree C is Optional)				Type C:-65 degree C~+150 degree C (200degree C is Optional)
	High temperature Range of Testing zone:  +60degree C~+150degree C(200degree C is Optional);  Low Temperature Range of Testing Zone: -10degree C~-40degree C/ -55degree C/-65degree C
Exposure Time of  High/Low Temperature	Exposure Time of High Temperature:+60degree C~+150degree C (200degree C is Optional)  30Mins
	Exposure Time of Low Temperature:-10degree C~Type A:-40degree C/  Type B -55degree C/ Type C -65degree C  30Mins
Temperature of  Heat-Storing Slot/ Heating Time	RT~200degree C/About  45mins
Temperature of  Cool-storing Slot/ Cooling Time	RT~-75degree C/ About 100mins
Temperature  Recovery Time/   Conversion Time	≤5min/≤5sec
Control Accuracy /   Distribution Uniformity	±0.5degree C/±2degree C
Internal and Externa l Material	Material of the inner box is SUS 304# stainless steel,of the outer box is stainless steel or SEE cold-rolled steel  with paint coated.
Insulation Material	High temperature  resistant, high density, formate chlorine,  ethyl acetum foam insulation materials
Mechanics	P.I.D+S.S.R+ Micro-computer balanced temperature control system
Cooling System	Semi-hermetic double-stage compressor(water-cooled type) / Hermetic double-stage compressor (air-cooled type)
Security Protection  Devices	Non-fuse breaker, high and low pressure protective switch of the compressor ,refrigerator  high-pressure protective switch, failure warning system, electronic alarm
Accessories	Viewing window(special order)
Compressor	French "Tecumseh" Brand, Germany Bizer Brand
Power	AC220V 1 phase  3 lines,50/60HZ, AC380V 3phase  5 lines,50/60HZ
Weight (Approx)	450	600		750		950

Temperature Shock Equipment Features:
1.It is divided into three zones: high temperature zone, low temperature zone, and testing  zone. The test sample is in static mode.
2.Using touch-control graph control as operation interface, easy to operate.
3.Applying wind route conversation to the shock method to distribute temperature to the testing zone for cold and thermal shock measurement.
4.For high temperature shock or low temperature shock, max. time is up to 999H, and max. circulation cycles are 9999 times.
5.The system can be used for automatic Circulation Shock or manual selective shock.
6.Adopt binary cooling system, with quick cooling effect. Cooling method is water cooling.
7.Can entering normal temperature. RS-232 and RS-485 communication.

Thermal Shock Test Chamber Pictures for reference:

Package: PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.


Q1. What is your terms of packing?
A: PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.

Q2. What is your terms of payment?
A: T/T 50% as deposit, and 50% before delivery. We'll show you the photos of the products and packages
before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CIF.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.


If you need more CE Certified Thermal Cycle Shock Chamber / Temperature Shock Equipment information, please let us know.