Salt Fog Corrosion Combined Heat Temperature Humidity Test System for Auto Parts

Product Description

Product Description

Salt Fog Corrosion Combined Heat Temperature Humidity Test System for Auto Parts is used for imitating natural status in increase imitation test. The imitating condition is harder than status that we usually meet. The tester can combine the follow status such as: Salt smog, dry, humidity, normal temperature, low temperature. The tester is for product used in intense changeable environment, such as: Parts of automobile, navigation equipment, camera equipment, building material, electroplate coating and resistant to metal electrolytic corrosion in electrical system.

Salt Fog Corrosion Combined Temperature Humidity Test System Features:

1. Adopt Humidity and temperature Controller with LCD touch screen digital display, RS-232 or RS-485 communication interface. (Temperature and humidity recorder, can keep complete records of the humidity and temperature graphs. This is optional. )
2. Operation mode: Programmable or constant
3 Capacity of Programmable operation is 100 groups 100 steps per group, and 100H per step
4. Capacity of constant operation is 10000H.
5. Memory function: In case of a power cut, the machine can resume the unfinished test as soon as power is recovered.

Product Parameters

Salt Fog Corrosion Combined Temperature Humidity Test System Technical Paramaters:

Model	THS-2000-B
Internal Dimension	2000×1000×1000(W×D×H) mm
External Dimension	2700×2000×1400(W×D×H)mm
Cabinet capacity	2000L
Controlled parameters	Temperature , relative humidity, Salt fog
Drying temp. range	Ambient to +75 deg C
Humidity temp. range	Ambient to +60 deg C
Humidity range (with dehumidify device)	20%R.H. ~98%R.H.
Salt fog fallout rates	rates adjustable from 0.5 to 2.5ml per 80cm2 per hour
Chamber material	P.V.C rigid plastic boar
Spraying method	Continuous and Programmable spray type
Temperature Rising/Falling Speed Rate:	From R.T. ( 25 Deg C) ~ 75 Deg C, needs about 30 mins, ( approx. 2.0 Deg C /min) From 70 Deg C ~ 30 Deg C, needs about 40 mins, ( approx. 1.0 Deg C /min)
Accuracy	Temperature 0.1 Deg C ; Humidity 0.1 %;
Control Accuracy	Temperature ±0.5 Deg C;  Humidity ± 2.5%R.H.
Uniformity	Temperature:  ± 3.5 Deg C Humidity     ±3.0% R.H(when humidity is 75%~98%);        ±4.0% R.H(when the humidity is 30%~75%);
Multiple Safety Protection Devices	Current discharge protection, over pressure protection, over temperature protection, over load fuse protection

 

Detailed Photos

Mechanical Structure

1. The internal chamber & testing made of CPVC sheet ;
2. Salt water adding barrel with hidden water level observation gauge, easy to clean, and not easy broken.
3. Saturated air bucket with SUS#304 stainless steel, pressure resistant barrel to ensure good heat preservation effect.
4. Testing room sample shelf adopts plane graduated rack, free adjustment to the angle, fog and mist completely consistent of the four corners, more quantity of test pieces placed.


Short introduction about ASLi factory:

We are a long history testing equipment manufacturer, in the past 28 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine. Salt Fog Corrosion Combined Temperature Humidity Test System is our star products , and we had obtained the CE certification for this machine .



ASLi main test equipments:

Environmental chambers, Electrodynamic High Frequency Vibration Tester, Electrodynamic Shaker, temperature (humidity) chamber,Thermal shock chamber, PCT /Hast chamber (Highly accelerated stress test chamber),ESS chamber, Walk in stability chamber,Vacuum oven,electrodynamic vibration shaker,mechanical shock tester,environmental combined vibration chamber,etc


Customer Reference List:

If you need more information about Salt Fog Corrosion Combined Heat Temperature Humidity Test System for Auto Parts, please feel free to send your inquiry