New Professional Lifter Type 2 Zone Thermal Shock Test Machine
27 years manufacturer
OEM available
High cost-effective
CE Marked Equipment
SGS tested SUS#304 stainless steel
1 Model: TS - 150A
A. Temperature range of high & low temperature zone:
1. High temperature zone: RT ~ 200º C
2. Low temperature zone: RT ~ - 55º C
B. Temperature range of testing zone:
1. High temperature range: 60º C ~ 150º C
2. Low temperature range: -10º C~-40º C
C. Analysis accuracy: 0.1º C
D. Control accuracy: (+/-)0.5º C; Uniformity: (+/-)2.0º C%(100º C); (+/-)3.0º C%(150º C).
E. Heating time of Heat-Storing zone: RT~200º C, approx 55 mins
F. Cooling time of cooling-storing zone: RT~-55º C, approx 55 mins
G. "Temperature Recovery Time of testing zone: In 5 mins (high or low temperature (constant temperature) shock time above 30 mins )"
H. Machine's structure and material:
1. Interior dimension: W600xH500xD500MM
2. Exterior dimension: W1600xH2000xD1700MM
3. Structure: High temperature zone, low temperature zone, testing zone
4. Internal material: SUS#304 hardy heat-resistant stainless steel
5. Outter shell material: SUS#304 SUS#304 hardy heat-resistant stainless steel
2 Product Specification:
A. Machine structure:
1. This system comply with thermal & cold shock reliability test standard. (CNS, MIL, IEC, JIS, ISO, ASTM, DIN, BS, UL, NACE...)
2. Testing sample is put on sample shelve, the cylinder drive to open the valve of heat-storing zone or cooling-storing zone. Guide cold air into testing zone, to achieve effect of fast cooling. Balance the temperature control system(TBHC) + Special designed air circulation system, Cotrol S. S. R. By P. I. D., make the system's heating equal to heat consumption, so the machine can long-term stability using.
"3. Adopt special design, save space & machine's height is very convenient for operator's operation, easy
For machine's maintenance. "
"4. Thermal insulation layer adopt high temperature resistant fireproof PU insulation high density fiber and cotton, and use the latest design of K type anti-perspiration duct system. "
5. Two layer sample sheves in testing zone, or quantity of sample shelve according to customer's requirement.
6. At the bottom of the machine equipped with high bearing pulley, easy for machine's move.
7. The machine test hole can be used to connect with the power or signal lines.
8. Hardy heat-resistant high tensile silicone foam insulation materials(PACKING)
B. Cooling system and temperature control:
1. Equipped with automatic and manual defrost circuits.
2. U-TYPE fin tube high speed electrothermal pipe.
3. Inner Spiral Model K - TYPE refrigerant copper tube
4. Imported type energy saving high efficient fully closed compressor.
5. Slope type FIN - TUBE evaporator.
6. Imported electromagnetic valve; Dry filter; Capillary refrigeration components, etc.
7. Use air cooled or water cooled condenser;
8. Can reserve liquid nitrogen control valve, used for quick cooling(optional)
9. High stability of the environmental protection refrigerant R404A
10. Cooling system adopt binary cascade refrigeration, fast cooling.
"11. Heat storage zone/ cool storage zone adopt multi layer wing type circulation fan, Forced air convection
System, to ensure the temperature uniformity"
"12. High temperature zone and low temperature zone both adopt P. I. D. +S. S. R. Micro computer control
Temperature, auto calculate to achieve high accuracy. ".
E. Saftey device:
1. With no-fuse protection switch
2. Control system with phase sequence protection and low voltage electrical protection.
3. With over-heat protection switch.
4. Over load protection device for refrigeration compressor.
5. Refrigeration compressor high and low voltage protection switch.
6. Refrigeration compressor over oil pressure protection.
7. Lack of Anti-phase protection system.
8. Overload protection for circulation fan motor.
Power: AC380V 3phase 5lines 50/60HZ
| technical parameters: |
| Model |
TS-150-B |
| Internal Dimension W*H*D ( mm) |
600*500*500 |
| External Dimension W*H*D (mm) |
1600*2000*1700 |
| Temperature Range of Testing zone |
-55 degree ~+150 degree (200degree is Optional) |
High temperature Range of Testing zone: +60 degree ~ +150 degree ( 200 degree is Optional );
Low Temperature Range of Testing Zone: -10 degree~-55 degree |
| Exposure Time of High / Low Temperature |
Exposure Time of High Temperature:+60 degree~+150 degree ( 200 degree is Optional) 30Mins |
| Exposure Time of Low Temperature:-10 degree~ -55 degree |
| Temperature of Heat-Storing Slot / Heating Time |
RT~200 degree / About 45mins |
| Temperature of Cool-storing Slot / Cooling Time |
RT~-75 degree / About 100mins |
| Temperature Recovery Time / Conversion Time |
≤5min/≤5sec |
| Control Accuracy / Distribution Uniformity |
+/- 0.5degree/ +/- 2degree |
| Internal and External Material |
Material of the inner box is SUS 304# stainless steel,of the outer box is stainless steel or see cold-rolled steel with paint coated. |
| Insulation Material |
High temperature resistant, high density, formate chlorine, ethyl acetum foam insulation materials |
| Mechanics |
P.I.D+S.S.R+ Micro-computer balanced temperature control system |
| Cooling System |
Semi-hermetic double-stage compressor (water-cooled type) / Hermetic double-stage compressor (air-cooled type) |
| Security Protection Devices |
Non-fuse breaker, high and low pressure protective switch of the compressor ,refrigerator high-pressure protective switch, failure warning system, electronic alarm |
| Accessories |
viewing window (special order) |
| Compressor |
French "Tecumseh" Brand, Germany Bizer Brand |
| Power |
AC380V 3 5 lines,50/60HZ |
| Weight (Approx) |
750 |
After-sale service:
Feedback within 2 hours, and offer solution in 48 hours and help to solve the problems.
Package: PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.
Short introduction about ASLi factory:
We are a long history testing equipment manufacturer, in the past 27 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine.Walk in stability test chamber is our star products , and we had obtained the CE certification for this machine.
Environmental chambers, temperature (humidity) chamber,Thermal shock chamber, PCT /Hast chamber (Highly accelerated stress test chamber),ESS chamber, Walk in stability chamber,Vacuum oven,electrodynamic vibration shaker,mechanical shock tester,environmental combined vibration chamber,etc
Audited Supplier 
){kind=link}