Programmable LCD Thermal Shock Test Equipment Air Cooled Thermal Shock Test Chamber

Product Description

Electronic 3 Boxes Environmental Cold hot Easy operating new professional chemical products temperature thermal shock test chambe

Application:
Temperature shock tester is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short period, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, electronics amongst other materials. The test result can be used as a reference or basis for product improvement. 

 

Technical Parameters:

Model	TS-49(A~C)	TS-80(A~C)	TS-150(A~C)	TS-252(A~C)		TS-450(A~C)	TS-900(A~S)
Internal Dimension   WxHxD ( mm)	400x350x350	500x400x400	600x500x500	700x600x600		800x750x750	1000x900x900
External Dimension   WxHxD (mm)	1400x1800x1400	1550x1950x1550	1600x2000x1700	1700x2100x1750		1800x2200x1900	2100x2400x2200
Temperature Range  of Testing zone	Type A:-40 degree~+150degree (200degree is Optional)		Type B:-55degree ~+150degree   (200degree is Optional)			Type C:-65degree ~+150degree(200degree is Optional)
	High temperature Range of Testing zone: +60degree~+150degree(200degree is Optional); Low Temperature Range of  Testing Zone: -10degree~-40degree/-55degree/-65degree
Exposure Time of  High/Low   Temperature	Exposure Time of High Temperature:+60degree~+150degree(200degree is Optional)  30Mins
	Exposure Time of Low Temperature:-10degree~Type B:-40degree/ Type B -55degree/ Type C -65degree  30Mins
Temperature of Heat-Storing Slot/ Heating Time	RT~200degree/About  45mins
Temperature of  Cool-storing Slot/ Cooling Time	RT~-75degree/ About 100mins
Temperature Recovery Time/ Conversion Time	≤5min/≤5sec
Precision temperature  Control / Distribution  Accuracy	±0.5degree/±2degree
Internal and  External Material	Material of the inner box is SUS 304# stainless steel,of the outer box is stainless steel or  SEE cold-rolled steel with paint coated.
Insulation Material	High temperature  resistant, high density, formate chlorine, ethyl acetum foam insulation materials
Mechanics	P.I.D+S.S.R+ Micro-computer balanced temperature control system
Cooling System	Semi-hermetic double-stage compressor(water-cooled type) /Hermetic double-stage compressor (air-cooled type)
Security Protection Devices	Non-fuse breaker, high and low pressure protective switch of the compressor ,refrigerator   high-pressure protective switch, failure warning system, electronic alarm
Accessories	viewing window(special order)
Compressor	French "Tecumseh" Brand, Germany Bizer Brand
Power	AC220V 1ph  3 lines,50/60HZ, AC380V 3ph  5 lines,50/60HZ
Weight (Approx) (KG)	450	600	750		900	1300	1500

Product Specification:
A. Machine structure:
(1) Structure: high-temperature storage area, cold storage areas, sample test area
(2) Out material: High grade stainless steel plate with white painting;
(3) Inner material: SUS304 stainless steel;
(4) Testing body heat preservation material: rigid polyurethane foam + fiberglass. (5) Door insulation materials: rigid polyurethane foam + fiberglass. 

2.Testing sample is put on sample shelve,the cylinder drive to open the valve of heat-storing zone or
cooling-storing zone.
Guide cold air into testing zone, to achieve effect of fast cooling . Balance the temperature control
system(BTC) + Special designed air circulation system, Cotrol S.S.R. by P.I.D. ,make the system's heating
equal to heat consumption, so the machine can long-term stability using.

3. Air adjusting Channel: Centrifugal fan:
Stainless steel heater, aluminum wind round, sealed duct valves, temperature sensors.

4. The device test load: Means that the sample have no heat source, the sample size can not exceed 50%
inside test volume , made of non-metallic products (which can be customized according to the user's
specific sample)

5. Testing box Configuration:
Viewing windows W300 x H400 three vacuum layer (special specifications optional type)
Plane embedded handle
Hinge SUS # 304
Inside lights 11W, sash / frame anti-condensation of electric devices, and Windows support
SUS # 304 stainless steel shelving two grille. Stainless steel adjustable shelving track 2 groups. Power test leads hole φ50mm , 1pcs silicone plug
Machine pulley: mining mobile adjust the placement and strength bolt position (500Kg / round)

6. Testing door: Single door, left open, the handle is on the right of the door.

7. Control panel: The controller display, power keys, alarm, emergency stop buttons. The controller
display, power keys, alarm, emergency stop buttons.

8. Mechnical room: Cooling system and Condenser

9. Power Control Cabinet: Distribution boards, exhaust fan.

10. Heater: Finned heat tubular stainless steel electric heating air circulation mode. Distribution boards, exhaust fan.

11. Cable hole: Located on the back of the box. 




Testing Specific:
GB/T 2431.1-2001 Testing A: Low temperature testing method
GB/T 2431.2-2001 Testing B: High temperature testing method
GJB 150.3-1986: High temperature
GJB 150.4-1986: Low temperature
IEC68-2-1 Test A: Cold
IEC68-2-2 Test A: Dry
GB 11158 High and low temperature test term
GB/T 2423.2 << Electrolic products basic environmental test: B: high temperature method>>

 

  1. Are your company a trading one or a factory?
Factory ,28 years focusing on test instruments field,4 years exporting experience.

2. After an order is placed, when to deliver?
Generally about 20 workdays, If we have finished products, we can arrange shipment within 3 workdays.
Please be aware that our production lead times depend on specific items and item quantities.

3. What about the warranty with after - sales services?
12 months warranty.
After the warranty, the professional after-sale service team will provide perfect technical support,and help customer solve problems encountered while using our product, handles guest problems and complaints in a professional and timely.

4. What about the services and product' quality?
Service: OEM service,Design service,Buyer lable service.
Quality: Each instruments must be carried out 100% quality examination and test, the finished products must through a third party calibration institutions before shipping and delivery goods.

5. How to install and training?
If the products is easy to install and training, customers can learn the operation and maintenance manual to installation and use.
If the products is hard to use, customers can come ASLi factory to learn how to installation and use. And our engineers have a passport, we can go to overseas.

6.What's your main products?
 Environmental chambers, temperature (humidity) chamber, PCT /Hast chamber (Highly accelerated stress test chamber),ESS chamber, Walk in stability chamber,Vacuum oven,Altitude chamber,vibration test system, mechanical shock tester,environmental combined vibration chamber,etc.

Welcome our new and regular customers visit our factory for Thermal shock test chamber, and any inquiries please feel free to contact us