Rain and Water Spray Test Chambers for Electronics, Automobile and Communication

Product Description

Rain and Water Spray Test Chambers for Electronics, Automobile and Communication


Application: 
Water Resistance Chamber is applied to test the shell's waterproof effect of electronics, automobile and communication, using rainfall simulation to test the product's waterproof performance and assess the product's waterproof performance's loss classification.

Water resistance test device Main Technical Parameters

Model	RT-1000A
Specimens	Flammable, explosive, easy volatile material sample test; Storage of corrosive substance sample test,biological test and strong electromagnetic emission source sample test are prohibited.
Volume	1000 L
Inner Dimension	W1000×H1000×D1000 mm
External Dimension	W1600×H1950×D1450 mm
Weight	400kg
Air Switch	63A
Power Supply	AC220V 50/60HZ Single Phase Three Lines 6 m2 Copper Wire
Performance Specification
Using Environmental:	Temperature:5~30 Deg C, Humidity<85%R.H.   (Without load)
Water Temperature	1. Water temperature can not controlled (environmental temperature) 2. (RT+15 Deg C) ~ 70 Deg C (Optional)
IPX1
Method name: vertical drop water test Sample placement: according to the normal working position of the sample, it is placed on the rotating sample table with 1r/min. The distance between the top of the sample and the drip outlet is not more than 200mm Test conditions: the droplet amount is 1.0+0.5mm/min.Test duration: 10min
IPX2
The method name: tilt 15 degree drop test Sample placement: make sample with a vertical into 15 degree Angle, sample top to drop water mouth distance not greater than 200 mm, each try after a plane, in another side, a total of four times. Test conditions: the droplet amount is 3.0+0.5mm/min.Test duration: 4 * 2.5min, 10min
IPX3
Swinging radius: 400mm Water flow: 1.12 ~ 2.50L/min Average flow speed per hole: 0.07 L/min, 16 holes in total, pore diameter: 0.4mm. Test time: 10 min, the test sample rotated 90 degree after 5 min
IPX4
The semidiameter of swing pipe : 400mm Water flow: 1.61 ~ 2.50L/min Average flow speed per hole: 0.07 L/min, 23 holes in total, pore diameter: 0.4mm.
IPX5
Water flow: 12.5L/min The diameter of hole: Dia. 6.3 mm. Test time: no less than 3min.
IPX6
Water flow: 100L/min The diameter of hole: Dia. 12.5 mm. Test time: no less than 3min.
Standards comply with	JIS-D0203 and IEC-60529   GB/T 2423.38 2006 / IEC 60068-2.18:2000 in the second part of the spray experiment method GB4208-2008 / IEC60529-2001 shell protection grade

Package: PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.


Short introduction about ASLi factory:
We are a long history testing equipment manufacturer, in the past 27 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine.Walk in stability test chamber  is our star products , and we had obtained the CE certification for this machine.
 
ASLi main test equipments:
Environmental chambers, temperature (humidity) chamber,Thermal shock chamber, PCT /Hast chamber (Highly accelerated stress test chamber),ESS chamber, Walk in stability chamber,Vacuum oven,electrodynamic vibration shaker,mechanical shock tester,environmental combined vibration chamber,etc

Any doubt or needs about Rain and Water Spray Test Chambers for Electronics, Automobile and Communication, please don't hesitate to contact me.