| Customization: | Available |
|---|---|
| After-sales Service: | Lifelong Technical Service Support |
| Power Supply: | AC380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Environmental Stress Screening Chamber is widely applied for electronic and electric products, components and materials by constant high low temperature, temperature change, rapid rate temperature change ,damp heat etc environmental simulation reliability test.
Standard :
GB/T10586-2006 Specifications for damp heat chambers
GB/T10592-1989 Specification for low/high temperature test chambers
GB/T5170.2-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. Temperature testing equipments;
GB/T5170.5-1996 Inspection on methods for basic parameters of environmental testing equipments for electric and electronic products--Damp heat testing equipments
GB/T5170.2-2008 Inspection methods for environmental testing equipments for electric and electronic products-Temperature testing equipments
GB/T2423.1-2008(IEC60068-2-1:2007)Environmental testing - Part 2: Test methods - Tests A: Cold
GB/T2423.2-2008(IEC60068-2-2:2007)Environmental testing for electric and electronic products Test methods - Tests B:Dry Heat
| Model | F-TH-150(A~F) | F-TH-225(A~F) | F-TH-408(A~F) | F-TH-800(A~F) | |
| Internal Dimension W*H*D( mm) |
500*600*500 | 600*750*500 | 600*850*800 | 1000*1000*800 | |
| Internal Dimension W*H*D (mm) |
1100*1750*1600 | 1200*1800*1700 | 1250*1900*1900 | 1600*2050*2150 | |
| Range of Fast Temperature Change |
Temperature Range: -70~+150degree C; Range of Fast Temperature Change: -45~+85degree C; Ma*. temperature rising/falling speed is 15degree C/min when the whole process with linear control . |
||||
| Humidity Range(Optional) | 20%~98%R.H.(10%-98% R.H. / 5%-98% R.H ,is optional ,need Dehumidifier) | ||||
| Indication resolution/ Distribution Uniformity of Temperature and Humidity |
0.1degree C; 0.1% R.H/±2.0degree C; ±3.0% R.H. | ||||
| Control Accuracy of Temperature and Humidity |
±0.5degree C; ±2.5% R.H. | ||||
| Temperature Rising/ Falling Velocity |
Rising/Falling Speed Rate with linear control : 3~15degree C/min, adjustable Rising/Falling Speed Rate non-linear control : 3~30degree C/min, adjustable |
||||
| Material | Interior material is SUS 304# stainless steel,e*terior is stainless steel or SEE cold-rolled steel with paint coated. |
||||
| Insulation Material | Resistant to high temperature, high density, formate chlorine, ethyl acetum foam insulation materials |
||||
| Cooling System | Water cooled/single segment compressor | ||||
| Protection Devices | Fuse-free switch, overloading protection switch for compressor, high and low voltage coolant protection switch, over-humidity and over-temperature protection switch, fuses, fault warning system, water short storage warning protection |
||||
| Optional Accessories | Inner door with operation hole(Optional), Water Purifier, Dehumidifier | ||||
| Compressor | French Tecumseh Brand, Germany Bizer Brand | ||||
| Power | AC380V 3Ph 5 lines, 50/60HZ | ||||
| Appro*. Weight(Kg) | 250 | 350 | 450 | 600 | |
){kind=link}