IEC 61215 UL Damp Heat Thermal Cycling Test Chamber /Climatic Test Chambers

• Customization: Available
• Certification: CE, TUV, ISO
• Warranty: 1 Year
• Model NO.: F-TH-2600-3.33
• Internal Dimension: W600*H750*D500mm
• Temperature Range: -70~150c
• Humidity Range: 15%~98%R.H.
• Analytic Accuracy Temperature: 0.1 Deg C
• Test Hole: Dia.50 mm
• Communication Interface: RS232
• Application: LED
• Control Method: LCD Display
• Transport Package: Wooden Case
• Specification: 225L
• Trademark: ASLi
• Origin: Guangdong, China
• HS Code: 8514109000
• Production Capacity: 100 Sets/Month

Product Description

IEC 61215 UL damp heat thermal cycling test chamber /climatic test chambers

Brief Introduction for PV Modules test standards:
The designed usage time for solar cell module is about 20~30years , and the reliability test is the simulation of the earth's surface photovoltaic modules (crystalline silicon and amorphous silicon thin film, concentrating) design verification, can let the module long-term operating more than 20 years in a general climate , specification requires that solar cells module do test below :
 
Thermal cycle test;
Humidity-freeze test;
Damp Heat;
 
To confirm the solar cell can withstand high temperature and high humidity level with the minus temperature influence, as well as for repeated change caused by the temperature and thermal fatigue failure, in addition to determine solar cells resistant to moisture long-term penetration ability of the test equipment design and ability to meet the relevant standards below:
(IEC61646 , IEC61416 ,IEC61215 , UL1703 , IEC62108 , IEEE1513 ,IEC61730 etc ) .ower :IEC62108 , IEEE1513
 
Damp Heat :
Condition :temperature 95 ±2 ºC , humidity: 95% ±5% R.H. 
            Testing last for 1000h ,
Purpose:To determine the ability of the module to withstand the effects of long-term penetration of humidity. 
 
 
Humidity-freeze test  
Purpose:The purpose of this test is to determine the ability of the module to withstand the effects of high temperature and humidity followed by sub-zero temperatures.
Test points:
low temperature -40ºC,high temperature 85ºC
Max temperature rising speed rate:200ºC/Hour=3.33/min
Max temperature falling speed rate:200ºC/Hour=3.33/min
24 hours per cycle,testing for  10 cycles, 240 hours(10 days)

Temp. Cycle Compare	High Temp. High Humidity	Low Temp	Temp. Change Rate	Cycle No.
IEC61215	85ºC/85±5%(20h)	-40ºC(0.5~4h)	High Temp. Rise& Fall(100ºC/h) Low Temp. Rise& Fall(200ºC/h)	10
GB9535	85ºC/85±5%(20h)	-40ºC(0.5~4h)	High Temp. Rise& Fall(100ºC/h) Low Temp. Rise& Fall(200ºC/h)	10
IEC61646	85ºC/85±5%(20h)	-40ºC(0.5~4h)	High Temp. Rise& Fall(100ºC/h) Low Temp. Rise& Fall(200ºC/h)	10
GB18911	85ºC/85±5%(20h)	-40ºC(0.5~4h)	High Temp. Rise& Fall(100ºC/h) Low Temp. Rise& Fall(200ºC/h)	10
UL1703	85ºC/85±2.5%(20h)	-40ºC(0.5~4h)	High Temp. Rise& Fall(100ºC/h) Low Temp. Rise& Fall(200ºC/h)	10
IEC62108	85ºC/85±2.5%(20h)	-40ºC(0.5~4h)	High Temp. Rise& Fall(100ºC/h) Low Temp. Rise& Fall(200ºC/h)	20 40

Thermal cycle test;
Test points:low temperature :-40ºC,high temperature:85ºC
Temperature falling/rising speed rate:100ºC/Hour=1.67ºC/min
6 hours per cycle, testing last 50~200 cycles
Total testing time last 300 to 1200 hours (12.5 to 50 days )
 

Temp. Cycle Compare	Low Temp	High Temp	Temp Change Rate ºC/h	Dwell Time	Cycle No.
IEC61215	-40±2ºC	85±2ºC	Max. 100ºC/h	Min.10min	50, 200
GB9535	-40±2ºC	85±2ºC	Max.100ºC/h	Min.10min	50, 200
IEC61646	-40±2ºC	85±2ºC	Max.100ºC/h	Min.10min	50, 200
GB18911	-40±2ºC	85±2ºC	Max.100ºC/h	Min.10min	50, 200
UL1703	-40±2ºC	90±2ºC	Max.120ºC/h	30~105min	200
IEC62108	-40±2ºC	65ºC,85ºC,110ºC	10cycle/day	10min	500,1000,2000
IEC62108	-40ºC	65ºC,85ºC,110ºC	18cycle/day	10min	500,1000,2000
IEEE1513	-40ºC	90ºC,110ºC	0.9~7.5ºC/min	Min.10min	250,500
IEEE1513	-40ºC	90ºC,110ºC	Max.100ºC/h	Min.10min	100,200
IEEE1513	-40ºC	60ºC,90ºC	Max.100ºC/h	Min.10min	50,200

After-sale service:
Feedback within 2 hours, and offer solution in 48 hours and help to solve the problems.
 
Package: PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.
 
Short introduction about ASLi factory:
We are a long history testing equipment manufacturer, in the past 25 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine.Walk in stability test chamber  is our star products , and we had obtained the CE certification for this machine.
 
ASLi main test equipments:
Environmental chambers, temperature (humidity) chamber,Thermal shock chamber, PCT /Hast chamber (Highly accelerated stress test chamber),ESS chamber, Walk in stability chamber,Vacuum oven,electrodynamic vibration shaker,mechanical shock tester,environmental combined vibration chamber,etc

Other products: