Gold Member Since 2014
Audited Supplier
Ai Si Li (China) Test Equipment Co., Ltd.

Solar Pv Testing Machine, Environmental Test Machine, Environmental Testing Machine manufacturer / supplier in China, offering Solar Panel Testing Environmental Test Machine, Electrodynamic Vibration Test System for Vibration Testing, Vibration Shaker Combined Environmental Chamber and so on.

(/ )

Supplier Homepage Product Environmental Test Chambers Solar Panel Testing Environmental Test Machine

Solar Panel Testing Environmental Test Machine

FOB Price: US $5,000-26,000 / Set
Min. Order: 1 Set
Min. Order FOB Price
1 Set US $5,000-26,000/ Set
Get Latest Price
Production Capacity: 50 Sets/Month
Transport Package: Wooden Case
Payment Terms: T/T, Western Union

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: THR-SERIES
  • Temperature Range: -70~+150 Degree C
  • Temp. Rising Speed: 0.1~3.0degree C/Min
  • Analytic Accuracy: 0.1degree C; 0.1% R.H
  • Control Accuracy: ±0.5degree C; ±2.5% R.H.
  • Advantage: OEM Available
  • Trademark: ASLi
  • Origin: Guangdong, China
  • Type: Heating Type
  • Humidity Range(Optional): 20%~98%R.H.
  • Temp.Falling Speed: 0.1~1.5degree C/Min
  • Uniformity: ±2.5degree C; ±3.5% R.H.
  • Cooling System: Water Cooling
  • Certification: CE,SGS
  • Specification: CE
  • HS Code: 85141910
Product Description
Solar Panel Testing Environmental Test Machine

25 YZ manufacturer
OEM available
High cost-effective
CE Marked Equipment
SGS tested SUS#304 stainless steel

Solar Panel Test Systems ( Temperature cycling / Humidity freeze / Damp heat testing )

Purppose:performance & reliability of PV (Photovoltaic) Modules, Solar Panels, AC Modules, Charge Controllers, PV Power Units, Inverters, Converters, Accessories and Components

Brief Introduction for PV Modules test standards:
The designed usage time for solar cell module is about 20~30years , and the reliability test is the simulation of the earth's surface photovoltaic modules (crystalline silicon and amorphous silicon thin film, concentrating) design verification, can let the module long-term operating more than 20 years in a general climate , specification requires that solar cells module do test below :
Thermal cycle testing;
Humidity-freeze testing;
Damp Heating;
To confirm the solar cell can withstand high temperature and high humidity level with the minus temperature influence, as well as for repeated change caused by the temperature and thermal fatigue failure, in addition to determine solar cells resistant to moisture long-term penetration ability of the test equipment design and ability to meet the relevant standards below:
(IEC61646 , IEC61416 ,IEC61215 , UL1703 , IEC62108 , IEEE1513 ,IEC61730 etc ) .ower :IEC62108 , IEEE1513
Damp Heat :
Condition :temperature 95 ±2 ºC , humidity: 95% ±5% R.H.,   Testing last for 1000h ,
Purpose:To determine the ability of the module to withstand the effects of long-term penetration of humidity.
Humidity-freeze test :
Purpose:The purpose of this test is to determine the ability of the module to withstand the effects of high temperature and humidity followed by sub-zero temperatures.
Test points:
low temperature -40ºC,high temperature 85ºC
Max temperature rising speed rate:200ºC/Hour=3.33/min
Max temperature falling speed rate:200ºC/Hour=3.33/min
24 hours per cycle,testing for  10 cycles, 240 hours(10 days)

Temp. Cycle Compare
High Temp. High HumidityLow TempTemp. Change RateCycle No.
IEC6121585ºC/85±5%(20h)-40ºC(0.5~4h)High Temp. Rise& Fall(100ºC/h)
Low Temp. Rise& Fall(200ºC/h)
GB953585ºC/85±5%(20h)-40ºC(0.5~4h)High Temp. Rise& Fall(100ºC/h)
Low Temp. Rise& Fall(200ºC/h)
IEC6164685ºC/85±5%(20h)-40ºC(0.5~4h)High Temp. Rise& Fall(100ºC/h)
Low Temp. Rise& Fall(200ºC/h)
GB1891185ºC/85±5%(20h)-40ºC(0.5~4h)High Temp. Rise& Fall(100ºC/h)
Low Temp. Rise& Fall(200ºC/h)
UL170385ºC/85±2.5%(20h)-40ºC(0.5~4h)High Temp. Rise& Fall(100ºC/h)
Low Temp. Rise& Fall(200ºC/h)
IEC6210885ºC/85±2.5%(20h)-40ºC(0.5~4h)High Temp. Rise& Fall(100ºC/h)
Low Temp. Rise& Fall(200ºC/h)

Thermal cycle test;
Test points:low temperature :-40ºC,high temperature:85ºC
Temperature falling/rising speed rate:100ºC/Hour=1.67ºC/min
6 hours per cycle, testing last 50~200 cycles
Total testing time last 300 to 1200 hours (12.5 to 50 days )

Temp. Cycle Compare
Low TempHigh TempTemp Change Rate ºC/hDwell TimeCycle No.
IEC61215-40±2ºC85±2ºCMax. 100ºC/hMin.10min50, 200
GB9535-40±2ºC85±2ºCMax.100ºC/hMin.10min50, 200
IEC61646-40±2ºC85±2ºCMax.100ºC/hMin.10min50, 200
GB18911-40±2ºC85±2ºCMax.100ºC/hMin.10min50, 200

After-sale service:
Feedback within 2 hours, and offer solution in 48 hours and help to solve the problems.
Package: PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.
Short introduction about ASLi factory:
We are a long history testing equipment manufacturer, in the past 25 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine.Walk in stability test chamber  is our star products , and we had obtained the CE certification for this machine.
ASLi main test equipments:
Environmental chambers, temperature (humidity) chamber,Thermal shock chamber, PCT /Hast chamber (Highly accelerated stress test chamber),ESS chamber, Walk in stability chamber,Vacuum oven,electrodynamic vibration shaker,mechanical shock tester,environmental combined vibration chamber,etc


 TH-80(A~F) TH-150(A~F) TH-225(A~F) TH-408(A~F) TH-800(A~F) TH-1000(A~F)
 Internal Dimension
WxHxD (mm)
 400x500x400 500x600x500 600x750x500 600x850x800 1000x1000x800 1000x1000x1000
 Internal Dimension WxHxD (mm) 950x1650x950 1050x1750x1050 1200x1900x1150 1200x1950x1350 1600x2000x1450 1600x2100x1450
 TemperatureRange Low Temperature(A:25ºC  B:0ºC  C:-20ºC  D:-40ºC  E:-60ºC  F:-70ºC)
 High Temperature 150ºC
 Humidity Range 20%~98%R.H.(10%-98% R.H. / 5%-98% R.H ,is a special optional condition, need Dehumidifier)
 Analytic Accuracy/
Distribution uniformity
of temperature
and humidity
 0.1ºC; 0.1% R.H/±2.0ºC; ±3.0% R.H.
 Control Accuracy of Temperature and Humidity ±0.5ºC; ±2.5% R.H.
 Temperature Rising/Falling Speed Rate Temperature rising approx.  0.1~3.0ºC/min / temperature falling approx.  0.1~1.5ºC/min; ( The Falling Speed Rate Min.1.5ºC per minute is a special optional condition)
Humidity control range 20%R.H.~98%R.H.
 Inner and Outer MaterialMaterial of the inner box is SUS 304# stainless steel, of the outer box is stainless steel or SEE cold-rolled steel with paint coated. 
 Cooling System Wind cooling or water cooling/single segment compressor(-40ºC, double segment compressor -70ºC)
 Protection Devices Fuse-free switch, overloading protection switch  for compressor, high and low voltage coolant protection switch, over-humidity and over-temperature protection switch, fuses, fault warning system, water short storage warning protection
 Optional Accessories   Inner door with operation hole , Recorder, Water Purifier, Dehumidifier
 Compressor French Tecumseh Brand,Germany Bizer Brand
 Power AC220V 1ph  3 lines, 50/60HZ ,  AC380V 3ph  5 lines , 50/60HZ
 Approx. Weight (Kg) 150 180 250 320 400 450

1.Graceful appearance, circularly shaped body, surface treated with mist strips and plane handle with no reaction. Easy to operate, safe and reliable.
2.Interior material:SUS#304 stainless steel , mirror polishing.
3.Exterior material:SUS#304 stainless steel.
4.Insulation Material:Resistant to high temperature, high density, formate chlorine, ethyl acetum foam insulation materials.
5.Test hole: One hole (Dia.50mm or Dia.100mm)  on left side of chamber, for connecting outside 's powerline or signal line.
Control system:
1.Imported LCD display screen, capable of displaying the measured value as well as the set value and time.     
2.Fixed condition or programmable condition can be set.
3.Fixed condition setting time range: 0 - 99 H 59 MIN .
4.Programmable mold can set 100 different programe at the same time, each programe can set serverial segement to do cycle testing
"5.Each prgrame can  have max.100 segement with different temperature setting,segement runing time 
Max.59 H99M ,  Max.can do 999 times cycle."
6.With power off memory device, reply message to continue with the rest of the program.
7.The control unit has the functions of multiples segment program editing, and of quick or slope control of temperature and humidity.
9.Temperature sensor adopt DIN PT-100Ω    
10. Adpot BTHC system to control temperature and humidity , P.I.D. control S.S.R..
11.With P.I.D. auto calculate funtion.
12. With alarm function when runing or setting fault.
13. 5 years memory back up device while power off 
14.With LOCK function for interface.
15.Recorder is optional
16.This system conform to constant temperature humidity  reliablity test standard:CNS,ISO,JIS,ASTM,DIN,BS,IEC,NACE,UL,MIL
Cooling system:
1.Impoerted power saving full closed compressor 
2.Cooling method: air cooling. 
3.Imported dry filter,electrol valve.,etc freeze accessories.
4.Air cooling type Conder,attached with heat dissipation moter device or water cooling pipe.
5.ryogenic system adopts dual refrigeration loop, fast cooling.
6.Expansion system: capillary capacity control refrigeration system.
Heated humidification system:
1.Adopt U-TYPE  SUS#304ss Electric heat pipe heater
"2.Humidify barrel made of SUS#304ss,with observation glass and electromagnetic valve of
 water level"
3.Idepently heat,wet humidify,dehumidify system.
4.With auto heating,wetting and demist function,with observation glass and imported tube.
"4.Humidification water recycling, automatic filling water system,25L built in draw-out type
 water tank ."
Saftey device:
1.With no-fuse protection switch
2.Over-heat protection
3.Ceramics E-16 fuse
4.high low temperature protection switch for compressor 
5.over heat swith for compressor                
6.Water shortage alarm, stop machine for long time water shortage protection.
Send your message to this supplier
Ms. Rachel
Sales Manager
To: Ms. Rachel

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now